Introducing the Kanger M-T3, 'M' stands for metal. These new Kanger T3's have a dual window to see your juice level that are inset on metal encasing. The metal encasign would provide better durability as well as possibly standing up to more acidic juice better. As in the regular Kanger T3s, the mouthpiece is fixed and you cannot remove. Filling is the same - invert tank, fill then screw the bottom coil back on and vape. The desciption below is in our original T3 product descriptions as pretty much the same applies. You can use the same bottom coil stems we have for the regular T3's on these.
New from Kanger, this is an outstanding performing bottom coil eGo clearomizer - The Kanger M-T3 2.4ml Bottom Coil eGo Clearomizer with Replaceable Coil Head, Stem/Base unit.
Extremely easy to fill (refer to instruction card in the pictures to the left), you simply unscrew the base, invert the clearo and fill straight out of your juice bottle. Keeping the unit inverted you then screw in your stem coil base.
We have labeled these as 2.4ml as that is what the markings on the side of the T3 show but you can probably get up to 3ml as the mouthpiece is fixed and completely sealed.
What You Receive With Your Purchase:
- One RED Kanger M-T3 tank assembly with a 2.4ohm Bottom Coil Coil/Stem base assembly.
- Additional coil head base assemblies are available elsewhere in this category.
- Length is 80mm compared to 73mm for the Kanger T2 Top Coils
- Please Note: The mouthpiece on this unit cannot be removed!
- This has eGo threading meaning you must use it on an eGo or use a 510 to eGo adpater (available in our Atomizer and Accessories category) in order to use this unit.
Please refer to our Terms before ordering this product.